Avocent AMX 5020 - User Stations; Figure 3.21: Information Screen; Figure 3.22: Status Screen

Chapter 3: Operations 55
Figure 3.21: Information Screen
6. Click Close to return to the Device Admin screen.
7. Click Cancel or X to exit the OSCAR interface.
To modify
IQ module properties, see Setting Device Properties on
page 58.
User Stations
You can configure settings specific to your user station by accessing the Console tab.
To view the user station status:
1. Press
Ctrl+Ctrl to launch the OSCAR interface.
2. Click the Console
tab. The Status screen displays the connection status of the AMX
user station.
Figure 3.22: Status Screen
3. Click Close or X to exit the OSCAR interface.
AMX.book Page 55 Thursday, June 12, 2008 4:14 PM