Avtech AVH304 User Manual

MAIN MENU
32
PUSH STATUS (for selected models only)
Before using this function, make sure:
 You have iPhone
®
, iPad
®
, or Android™ mobile phone or tablet.
 You have subscribed the mobile network service from your mobile service provider.
 The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “APPENDIX 4 MOBILE SURVEILLANCE
VIA EAGLEEYES” at page 38.
 You have configured EagleEyes to access this recorder, and Push Video is enabled. For details, please refer to “APPENDIX 5 SET
PUSH VIDEO” at page 39.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH STATUS MESSAGE MAIL
VIDEO MAIL
CAMERA
ACTION ON
DETECTION
EVENT 
ALL
ALERT

VIDEO LOSS
NETWORK

HDD FULL
DISPLAY

POWER ON
RECORD

HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NOTIFY

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL
EXIT
Step1: Switch “ACTION” to “ON”.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable “Push Status” in EagleEyes on your mobile device, and try to trigger an alarm event to see if
you’ll get Push Status.
MESSAGE MAIL
Note: For E-mail notifications, make sure you have configured an E-mail account in “NETWORK” 
“E-MAIL” to send the notifications.
Enable this function in “ACTION”, select the event type(s) you want to send notifications in “EVENT”, and add
the E-mail address(es) to which you want to send notifications in “RECEIVER”.
You’ll get an E-mail telling you the occurrence of your selected event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH STATUS MESSAGE MAIL
VIDEO MAIL
CAMERA
ACTION ON
DETECTION
EVENT 
ALL
ALERT

VIDEO LOSS
NETWORK

HDD FULL
DISPLAY

POWER ON
RECORD

HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NOTIFY

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL
RECEIVER SETUP
EXIT

Avtech AVH304 Specifications

General

Brand	Avtech
Model	AVH304
Category	DVR
Language	English