CONNECTION
6
Step3: Power on the camera.
Step4: On the recorder’s live view, choose MENU
CAMERA CONNECTION to go to the setting
page. For the channel to which you want to connect the IP camera, change the interface from
COAXIAL to IPCAM.
CONNECTION
CHANNEL
TITLE
INTERFACE EDIT ENABLE URI PORT DEVICE
TYPE
VENDOR MODEL STREAM
PROTOCOL
METHOD PATH1 PATH2
CH1 IPCAM
192.168.1.11 88 IPCAM AVTECH RTP-Unicast TCP
CH2 IPCAM
CH3 COAXIAL
CH4 COAXIAL
IP SEARCH
Step5: Choose IP SEARCH to go to the IP SEARCH page directly and start searching the connected IP
cameras.
You’ll see the list of every connected IP camera with its connection status to this device and MAC
address. Click to assign the camera to the channel automatically and choose ADD to complete.
IP SEARCH
ASSIGN EDIT DEVICE TYPE IP NETMASK GATEWAY PRIMARY DNS PORT MAC VENDOR
CH2
IPCAM 192.168.1.12 255.255.255.0 192.168.1.1 8.8.8.8 88 00:0E:53:31:06:E5 AVTECH
IPCAM 192.168.1.12 255.255.255.0 0.0.0.0 8.8.8.8 88 00:0E:53:31:06:E5 ONVIF
IPCAM 192.168.1.13 255.255.255.0 192.168.1.1 8.8.8.8 88 00:0E:53:31:15:D1 AVTECH
IPCAM 192.168.1.13 255.255.255.0 0.0.0.0 8.8.8.8 88 00:0E:53:31:15:D1 ONVIF
REFRESH ADD
To Next Page
Loading...
