Avtech H.265 XVR Series User Manual

MAIN MENU
21
6. MAIN MENU
6.1 CAMERA
6.1.1 CONNECTION
This menu is used to add an IP camera to the recorder when your recorder supports this function.
Note: Please check the specifications of your device to know if your recorder supports IP camera
connections.
Before connecting an IP camera, make sure its IP address will be in the same network segment as the one your
router uses.
For the channel to which you want to connect the IP camera, change the interface from COAXIAL to IPCAM.
Then, choose IP SEARCH to enter the IP search page. You’ll see the list of all connected IP cameras for you to
choose. For details, please check “IP Camera” at page 5 for details.
CONNECTION
CHANNEL
TITLE
INTERFACE EDIT ENABLE URI PORT DEVICE
TYPE
VENDOR MODEL STREAM
PROTOCOL
METHOD PATH1 PATH2
CH1 IPCAM

192.168.1.11 88 IPCAM AVTECH RTP-Unicast TCP
CH2 IPCAM

192.168.1.12 82 IPCAM ONVIF RTP-Unicast TCP
COAXIAL

COAXIAL

BATCH IP SEARCH
6.1.2 DEVICE
DEVICE
CHANNEL TITLE ENABLE CACHE TIME (MSEC) PORT
FORWARD
CAMERA
TYPE
ALARM
OUT
OSD TITLE OSD LOGO
CH1
81
AUTO 3 UP LEFT UP LEFT
CH2
82
AUTO 3 UP LEFT UP LEFT
CH3
83
AUTO 3 UP LEFT UP LEFT
CH4
84
AUTO 3 UP LEFT UP LEFT
APPLY
1) CHANNEL TITLE
Click to revise the channel title (up to 63 characters). The default title is the channel number.

Avtech H.265 XVR Series Specifications

General

Brand	Avtech
Model	H.265 XVR Series
Category	DVR
Language	English