MAIN MENU
47
6.11.3 LOCAL ALARM IN
Note: This function is used when the recorder supports alarm-in connection and there’s an alarm
sensor such as an infrared sensor connected to the recorder. For configuring the alarm sensor
connected directly to the camera, please refer to “6.1.4 DETECTION” at page 23.
Choose how the alarm sensor you connected works: OFF / N.C. / N.O.
The alarm device connected to Alarm IN 1 will work with video channel 1, the alarm device connected to Alarm
IN 2 will work with video channel 2 and so on.
LOCAL ALARM IN
CHANNEL TITLE ALARM IN
CH1 OFF
CH2 N.C.
CH3 N.O.
CH4 OFF
APPLY
6.11.4 LOCAL ALARM OUT
Note: This function is used when the recorder supports alarm-out connection and there’s an alarm-out
device such as a buzzer connected to the recorder. For configuring the alarm-out device
connected directly to the camera, please refer to “6.1.5 ALARM OUT” at page 26.
LOCAL ALARM OUT
NAME RESTORE AUTOMATICALLY ALARM OUT DURATION (SECS)
Alarm Out ENABLE 1
APPLY
1) RESTORE AUTOMATICALLY
When this function is enabled, the alarm-out device will return to the state before it’s triggered automatically
after the time configured in ALARM OUT DURACTION (SECS).
2) ALARM OUT DURACTION (SECS)
Choose how long the alarm-out device will be activated when it’s triggered: 1 / 3 / 5 / 10 / 20 / 30 / 60 /
120 / 180.
To Next Page
Loading...
Need help?
General
