MAIN MENU
43
6.8.2 FTP
Configure up to 7 FTP sites here to upload event notifications or reports.
FTP
FTP 1 FTP 2 FTP 3 FTP 4 FTP 5 FTP 6 FTP 7
NAME Profile1
SERVER 211.75.33.2144
PORT 25
USER NAME office
PASSWORD
APPLY
6.8.3 EaZy
This function is used to connect this recorder to Internet by using EaZy Networking. For details, please refer to
“APPENDIX 6 EAZY NETWORKING” at page 65.
EaZy
ENABLE EAZY NETWORKING ON
MAC: 000e53eca7b4
UUID: E736DCBF-D4BB-4CA8-86FD-62658E2ECEC1
PORT: 80
EAZY NETWORKING OFFLINE
6.9 TIME
6.9.1 TIME SETUP
TIME SETUP
DATE 2009 / NOV / 17
TIME 15 : 35 : 53
FORMAT Y/M/D
NTP SERVER Pool.ntp.org
SYNC PERIOD DAILY
GMT (UTC+08:00)TAIPEI
CLIENT TIME SYNC VIA RECORDER OFF
1) DATE
Set the current date. The default display format is YEAR – MONTH – DATE (Y-M-D).
2) TIME
Set the current time in HOUR : MIN : SEC.
3) FORMAT
Set the time display format: Y/M/D, M/D/Y or D/M/Y.
4) NTP SERVER
Click to change the default NTP server to another server they’re familiar with, or keep the default NTP server.
5) SYNC PERIOD
Select to synchronize the device time every day (DAILY), or turn this function off (OFF).
6) GMT
Select your time zone.
7) CLIENT TIME SYNC VIA NVR WAN (Applicable when an IP camera is connected)
Enable this function to synchronize the time of the connected IP cameras via the recorder when the recorder
is connected to the Internet. This could ensure the time of the recorder and IP cameras are the same to
prevent the confusion of time inconsistency.
To Next Page
Loading...
Need help?
General
