MAIN MENU
30
6.3.2 Scenario Customization
Click
and choose a template where you can press the button of EVENT, RECORD, TIME or ACTION to
customize all your events and further actions:
1. ONE OF (EVENT) TO (RECORD)
2. ONE OF (EVENT) AT (TIME) TO DO (ACTION) AND THEN (ACTION)
3. AT (TIME) TO DO (ACTION) AND THEN (ACTION)
4. ALL OF (EVENTS) TO DO (ACTION) AND THEN (ACTION)
5. (EVENTS) TO TRIGGER (RECORD)
6. START (RECORD) AT (TIME)
7. ONE OF (HEALTH EVENT) OCCURRED AT (TIME) TO SEND PUSH STATUS
8. ONE OF (EVENT) TO DO (ACTION) AND THEN (ACTION)
9. ONE OF (EVENT) TO DO (ACTION)
EVENT
Up to 5 events could be added to the event list when you click the EVENT button.
Option Description
MOTION and ALARM MOTION Choose at least one channel which has enabled
motion detection.
ALARM Choose at least one channel which has
connected to our brand’s camera and an alarm
sensor is connected to the camera.
PIR Choose at least one channel which has
connected our brand’s camera with a PIR sensor
built-in.
IVS FLOW COUNTING IN Choose at least one channel which has enabled
flow counting / one way / virtual fence / scene
change depending on the option you’ve chosen.
FLOW COUNTING OUT
ONE WAY PASS
VIRTUAL FENCE
CAMERA SCENE CHANGE
HEALTH CHECK LOGIN LOCKED Choose at least one status that you want to pay
attention to.
SYSTEM ERROR
VIDEO LOST
VIDEO PLUGIN
NET LOGIN
POWER ON
UPS POWER LOST
UPS POWER RECOVERED
WAN UNPLUGGED
WAN PLUGIN
INTERNET CONNECTED
LAN PLUGGED
LAN PLUGIN
HDD CLEAN
HDD OVER TEMPERATURE
NO HDD EXIST
KEY UNLOCKED
FAN BROKEN
FAN REPAIRED
GUARD GUARD Enable or disable Push Video.
To Next Page
Loading...
Need help?
General
