MAIN MENU
41
6.7.2 GROUP
This function is used to create a new group with customized user access rights for different functions if needed,
and you can create a user account and assign it to your customized group.
Note: The default user groups are SUPERVISOR, POWER USER, USER and GUEST, and they’re not
allowed to be removed. For details about available local operations of each user group, please
refer to “6.7 ACCOUNT” at page 40.
BACKUP
MANAGER
GENERAL LOCAL NETWORK
BACKUP ALL
PTZ CONTROL OFF
POWER CONTROL ON
REVIEW LOG ON
CONFIG SETUP OFF
CLEAR LOG OFF
ACCOUNT SETUP OFF
CLEAR HDD OFF
PUSH VIDEO ON
PUSH STATUS ON
ALARM OUT ON
APPLY
Icon Meaning Description
Delete
Choose a customized user group and delete it. The default user groups (SUPERVISOR,
POWER USER, USER and GUEST) can’t be removed.
Add
Click to enter a group name, and select the tabs of GENERAL, LOCAL and NETWORK
to choose the corresponding functions you want to enable or disable.
Then, click APPLY to confirm.
Import You need to create a user group first to use this function.
Choose one of the default user groups you want to modify for your customized group from
the drop-down list and click
choose a customized group to import the configurations.
Then, you can quickly modify the configurations and click APPLY to confirm.
To Next Page
Loading...
Need help?
General
