MAIN MENU
24
4) MOTION
Select if you want to activate the motion detection function for the selected channel (ON / OFF).
5) AREA
Click EDIT to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.
6) ADVANCED CONFIG
The advanced settings are available only when the connected camera supports.
Video Analytics
The options within this function should work with CMS PRO to take effects. For details, please check with your
installer or distributor.
PRIVACY MASK
SCENE CHANGE OFF
DEFOCUS OFF
ENABLE OBJECT DETECTION OFF
ENABLE FACE DETECTION OFF
APPLY
Privacy mask
You can cover certain areas on the camera image with privacy masks. Up to 20 areas could be added.
PRIVACY MASK
MOSAIC SIZE 8x8
NAME FUNCTION MOSAIC COLOR MOSAIC COLOR TRANSPARENCY
MASK1 OFF OFF ON 0%
MASK2 ON ON ON 25%
ADD EDIT DEL
Select ADD to add a new setting, EDIT to modify an existing setting, and DEL to remove a setting.
PRIVACY MASK - EDIT
NAME MASK3
FUNCTION ON
MOSAIC
ON
COLOR ON
MOSAIC COLOR
TRANSPARENCY 50%
MASK AREA SETUP
Item Description
MOSAIC SIZE Choose the mosaic size of the privacy mask. The options are: 8×8, 32×32, and 64×64.
NAME Name your privacy mask.
FUNCTION Select ON to enable the privacy mask function.
MOSAIC Select ON to have the mosaic effect.
COLOR Select ON to color the privacy mask. In the meantime, you can’t see the mosaic effect.
COLOR FOR MASK Select the color for the privacy mask.
TRANSPARENCY Select the transparency for your privacy mask. The options are: 0%, 25%, 50%, and 100%.
When 100% is chosen, no color is shown but only the mosaic effect for the mask area.
LINE WIDTH Select if you want to know where the mask area is especially when the transparency is set to
100%. This function will add a border for the mask area. The options are: 0, 2, 4 and 6.
When 0 is chosen, no border is added.
MASK AREA Select SETUP to enter the area selection page. To exit, right click.
To Next Page
Loading...
