MAIN MENU
45
6) LANGUAGE
Select the language of the OSD.
7) SPOT MONITOR
Specify how VGA / composite port is used for video output: CALL MONITOR / EVENT MONITOR /
LIVE.
Note: For some models, only the VGA or composite port supports this function. The available output
options depend on the model you have.
CALL MONITOR is used for sequence display. When this option is selected, go to CALL SCREEN
DURATION to select the duration time in second (03 / 05 / 10 / 15) and CALL MONITOR
PERMIT to choose the channel(s) you want for sequence display.
SPOT MONITOR
SPOT MONITOR VGA
VGA RESOLUTION 1920 x 1080
SPOT DISPLAY CALL MONITOR
CALL SCREEN DURATION 5
CALL MONITOR PERMIT 4 selected
EVENT MONITOR is used when any alarm event occurs. When this option is selected, go to
LAYOUT to select how many channels you want to see, and PRE-ALARM (SEC) and
POST-ALARM (SEC) to set how many seconds you’d like to see before (0 ~ 5) and after (3 ~ 10)
the event starts.
SPOT MONITOR
SPOT MONITOR VGA
VGA RESOLUTION 1920 x 1080
SPOT DISPLAY EVENT MONITOR
LAYOUT 4
PRE-ALARM (SEC) 3
POST-ALARM (SEC) 5
LIVE is used to select how many channels you’d like to show on the spot monitor. You can configure
up to 7 profiles for live display.
SPOT MONITOR
SPOT MONITOR VGA
VGA RESOLUTION 1920 x 1080
SPOT DISPLAY LIVE
PROFILE 1
LAYOUT 4
CH1 CH3
CH5
CH8
To Next Page
Loading...
