Axis ME-02/N/LCD - Batching Modes and Functions

ME-02 USER MANUAL MD004 25
_____________________________________________________________________________________________
ModE
Func
M_LOW
M_PULSE
t_CYCLE
t_PULSE
MAnUAL
totAL
n tArE
FAS SLO
Mod rE
ProtECt
CrASH
dUAL
InPUt
but LOC
ACCES
UP
CYCLE
MASS [kg]
CYCLE [n]
COntIn
End nEt
no Stb
End Stb
no StbS
dELAY C
dELAY T
tArE C
CorrECt
EMPTY
PAUSE C
StoP C
6 COMP
dOWn
no Stb
End
dELAY C
tArE C
6 COMP
FILL
rAtIO
M_rEF
M_Min
- batching mode
- batching up
- cycles:
- total batching weight (with recipe proportion)
- cycles total quantity (each cycle coherent with recipe)
- cyclic batching (continous work)
- end nett weight (if not activated: gross)
- batching without stabilization (if not activated )
- stabilization - only in last ingredient
- batching without stable tare during start
- delay between ingredients (value in seconds)
- delayed tare during start
- batching with taring each ingredient
- next ingredient correction when dumping first ingredient
- emptying container after each ingredient and start
- batching with interruption and activation: Clr-Start - continue, Clr-Clr - stop
- after batching each ingredient confirmation needed (Enter key)
then emptying, tare and batching next ingredient
- batching 6 ingredients (if not activated batching 8 ingredients)
- batching down (decrease)
- batching without stability, batching with stability
- stability - only in last ingredient
- delay between ingredients
- batching with taring each ingredient
-
- filling tank
- special option
- reference weight
- first ingredient minimal weight
- slowdown weight
- pulse batching weight (how many to threshold)
- pulse cycle period
- impulse time
- special functions
- rinsing option – batching up - weight to batch
- succesive batching function (on -turn on, Prn - receipt printout)
- function how often tare (n cycle)
- second relay OUT2 - fast/slow
- START/STOP relay turned on after finishing batching and works
until obtaining zero
- second relay OUT2 - safety threshold
- accident, weight doesn’t change (eg. 30s)
- relays turned on in pairs
- allowance – during batching hold by IN1
- OFF key blockade during batching and rinsing
- access code to several functions
: batching with stabilization
(value in seconds)
:
batching 6 ingredients (if not activated: batching 8 ingredients)
,
F