Axis ME-02/N/LCD - Settings Configuration

26 ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
SEt Prn
MEtEr
AUtoZEr
UnIt
SErIAL
rESOLUt
dAtE
b_LIGHt
AUtoOFF
AnALOG
FIrMW
dEFAULt
SErVICE
out
ZEr_cod
ZEr_SEt
unLOAd
ZEro_S
CodE_SEt
HEAdEr
USEr Id
USEr nA
dAtE
tIME
Nr Prn
Prod nr
Prod Id
Prod NA
n CYCLE
rECIPE
Product
Prn LCd
nEttO
tArE
GroSS
Auto
CALIb
ZEr
- printout settings
- header: scale type, scale parameters, serial no.
- company ID
- company name
- date
- time
- receipt number
- program number
- product number
- product name
- batching cycle number
- recipe
- batching report
- actual result from indicator
- actual nett weight
- actual tare
- actual gross weight
- printout type – key PRINT / AUTOMAT
- meter settings
- scale calibration (available in non-legalized scales)
-
- access code change
- zero indication maintaining
- wieght unit selection
- serial port settings
- scale division increase
- display backlighting
- automatyczne wyłączanie zasilania
- analog out settings 4-20mA, 0-10V
- uploading firmware from computer
- default settings
- service menu (service code inscribing)
- exit
zero test during turn on (UnLOAd communicate)
- unlock access to zero by code
- reference zero to zero test
- UnloAd communicate turn off
- zero when supply on
- date and time setting