Start Menu Main Menu Inputs/Outputs Digital Output #3 Full Scale Freq
Preset Amount
Set Point Min.
Set Point Max. Normally Open
Output Type Normally Closed
Hardware Select Relay
Open Collector
Select Funtion None
Frequency Output
Flow Set Point
Empty Pipe Alarm
Flow Direction
Preset Output
Error Alarm
Digital Output #4 Full Scale Freq Totalizer Alarm
Preset Amount
Set Point Min.
Set Point Max. Normally Open
Output Type Normally Closed
Hardware select Relay
Open collector
Flow Direction
Flow Simulation Preset Output
Error Alarm
Clear Totals Totalizer Alarm
Communications Port A Settings Interface Modbus RTU (DEF)
Port Address Remote Menu
Baud Rate Primo 3.x
Data Bits Flow Diagnostic
Parity Disable Port
Stop bits
Port B Settings Port Address
Ext. Port Address
Diagnostics Baud Rate
Data Bits
Parity
Stop bits
Advanced Daten Logger Logging interval
View System Clock
Set System Clock
Token copy Configuration
Encoder Protocol Store to Token
Totalizer Dials Restore from Token
Totalizer Resolution
Backlight Control
Analog Calibrate
Software Filter MDN-Filter
ACC-Filter
ZFS-Filter
IIR-Filter
Empty Pipe Cal.
Security Set Admin Pin
Set Service Pin
Info/Help Error Counts Set User Pin
PowerUp Counter
PowerOff Totalizer
Version Info
Serial Number
Meter Tag Name
Daughter board Info
Polarization Volt.
Language Select Restore Default
To Next Page
Loading...
Need help?
General
