ORION® Mobile Read
Page 31 April 2019
Settings – ORION Devices:
ORION CE Mobile Receiver and ORION ME Mobile Transceiver
OMR can read ORION CE and ORION ME endpoints.
1. Select the checkbox for the type of reading device you are using.
2. Connect the device to the tablet/laptop and ensure the unit has power and is turned
on.
3. Select the appropriate COM Port.
4. Press the Test button. If successful, the Test response will say successful.
5. Click Save to preserve the setting. If unsuccessful, check transceiver power, on/off
switch, and connection to the tablet/laptop, or try another Com Port.
To Next Page
Loading...
Need help?
General
