ORION® Mobile Read
Page 40 April 2019
Trimble Ranger 7 Keyboard Functionality
The Trimble Ranger 7 has a full QWERTY keyboard with Hot Key functionality to allow for
complete control of the OMR software without having to use the Touchscreen.
The steps listed below detail the simplest way to read a route with a significant number of
manual work items
1. Tap on the first Manual work item you wish to read in the Active Worklist.
2. Using the Keyboard press Alt+Q to begin the manual read process on the selected
work item.
3. Use the Keypad to enter the reading.
4. Using the Keyboard press Alt+Enter to Complete the manual read process and save
the read.
5. The next unread meter will already be selected in the Active worklist.
6. Repeat steps 2-5 until all manual work items are completed.
Complete List of all Hot Key Options:
Alt+Q Start the assignment Active Worklist
Alt+P
Suspend the assignment Work Item Details or
Meter Read Value
Alt+Enter
Complete the assignment Work Item Details or
Meter Read Value
M Activate “Meter Read” control Work Item Details
E Activate “Extended Status” control Work Item Details
H Activate “Historical Interval” control Work Item Details
F Activate “Collect Firmware” control Work Item Details
N Activate “Notes” control Work Item Details
O Move to Comments Notes
T Move to Trouble Codes Notes
R Move to Reader Codes Notes
Ctrl+Alt+D Deactivate Current Control
Alt+H Focus on Main Menu
Alt+V Focus on Map View
Alt+L Focus on Detail View
Alt+A Focus on Active List
Alt+C Focus on Completed List
To Next Page
Loading...
Need help?
General
