ORION® Mobile Read
Page 35 April 2019
ORION ME Two-Way Functionality
ORION ME endpoints are capable of two-way communication. This allows the user to pull
additional information from the endpoints via the ORION Mobile Read software on a laptop
or tablet, or via the Trimble handheld device. Information includes hourly historical data,
extended status messages and firmware version.
Please Note:
In OMR all of the 2 way assignments require the meter reader to stop the vehicle
and open the work item in the OMR software and trigger the actual assignment for it
to complete the process. These assignments will not auto trigger during the route
reading process.
If the meter reader wants to trigger an ad hoc two-way communication on a Meter
Read work item it must be in either the Assigned or Investigate status. Once a work
item transitions over to Completed it is too late to collect additional two-way
information without creating a child work item.
If the meter reader gets a Failed Communication message the user needs to click on
the blue work item button again to re-launch the work item and try again.
To Next Page
Loading...
Need help?
General
