Balluff BTL7-P511-M P-S32 Series - Safety; Intended use; General safety notes for the position measuring system; Explanation of the warnings

www.balluff.com 3english
BTL7-P511 -M ____ -P-S32/S115/KA_ _
Micropulse Transducer in a Profile Housing
1
Notes to the user 5
1.1 Validity 5
1.2 Symbols and conventions 5
1.3 Scope of delivery 5
1.4 Approvals and markings 5
2
Safety 6
2.1 Intended use 6
2.2 General safety notes for the position measuring system 6
2.3 Explanation of the warnings 6
2.4 Disposal 6
3
Construction and function 7
3.1 Construction 7
3.2 Function 8
3.3 Number of magnets 8
3.4 LED display 8
4
Installation and connection 9
4.1 Installing the transducer 9
4.2 Captive magnets 9
4.3 Floating magnets 10
4.4 Electrical connection 11
4.4.1 Connector S32/cable 11
4.4.2 Connector S115 11
4.5 Shielding and cable routing 12
5
Startup 13
5.1 Starting up the system 13
5.2 Operating notes 13
6
P interface 14
6.1 Principle 14
6.2 DPI/IP method 14
6.2.1 Function and characteristics 14
6.2.2 Protocol parameters 15
7
Technical data 16
7.1 Accuracy 16
7.2 Ambient conditions 16
7.3 Supply voltage 16
7.4 Output 16
7.5 Dimensions, weights 17
7.6 Connection to the evaluation unit 17