Barco ClickShare CS-100

R5900022-09 ClickShare CS-100 69
Image 6-20: Services, mobile devices
3. To allow sharing content via ClickShare app, check the check box in front of Sharing via ClickShare app.
4. To add a passcode, click on the drop down and select the desired passcode.
The following options are possible:
• No passcode
• Numeric passcode
5. Click Save changes to apply this setting.
Access via the ClickShare app is activate.
6.13 Services, Remote Button Pairing
About remote Button pairing
When using ClickShare Button Manager, a stand alone software application on your computer, you can
manage your Buttons on most of the types of ClickShare Base Units. Your computer can pair up to four
Buttons at once with a known Base Unit. It is not necessary anymore to physically connect the Button with the
Base Unit to pair it. This functionality makes it easy to use any Button with any Base Unit. Before you can use
the ClickShare Button Manager a password must be configured on each Base Unit.
How to setup
1. Log in to the Configurator.
2. Click WiFi & Network → Services.
3. Scroll to Remote Button Pairing.
CS-100 Configurator