Barco ClickShare - Maintenance, Buttons Information

6. ClickShare Web Interface
Detailed info for the WiFi network
To see the MA C address of the associated devices, click on the corresponding detail button to get an overview.
Image 6-21
Detail associated devices
System Management
Use the Restart System button to restart ClickShare.
Use the Shutdown System button to shutdown ClickShare.
Image 6-22
System m anagement
6.13 Maintenance, But tons information
About buttons
The Buttons tab gives inform ation on t he Buttons that have been paired to the Base Unit.
The following information is given:
• Connected or not
• Serial number
• Last connected
• Status
How to get the information
1. Log in t o the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Buttons (2).
The content of the Buttons tab is displayed.
38
R5900014 CLICKSHARE 16/09/2013