Barco E192HSA User Manual

5. Advanced operation
5. ADVANCED OPERATION
5.1 OSD pictu re menu
Overview
•Profile
• Brightness
• Contrast
• Saturation
• Color temperature
•Gamma
• Sharpness
5.1.1 Profile
About profiles
To select a profile means to load a set of predefined video parameters like Brightness
, Contrast, Satura-
tion, Input selection (Primary & Secondary), Multi-image layout selection, etc.
The user can modify the default video parameters associated to each profile and save the new parameters
setting under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be temporarily
modified, but the factory default can’t be overwritten and can always be recalled through the recall profile
menu item.
The available profiles for your display are:
•Factory
•XRay
•User1
•User2
•User3
To select a profile
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Profile submenu.
4. Select one of the available profiles and confirm.
5.1.2 Brightness
To adjust the brightness level
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Brightness submenu.
The command bar Brightness is highlighted.
4. Set the brightness level as desired and confirm.
K5902113 (451920611383) E192HSA 27/11/2017
21

Barco E192HSA Specifications

General

Brand	Barco
Model	E192HSA
Category	Monitor
Language	English