5. Advanced operation
•10Sec.
•20Sec.
•30Sec.
•60Sec.
•Disabled(=5minutes)
To adjust the OS D tim e-out
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Time-out
5. Select one of the available OSD time-out values and confirm.
5.4.4 Recall Profile
About recalling profiles
To re ca ll a pr ofile means to restore the default factory settings (Factory and X Ray profiles) or recall the
user defi ned profiles.
Theavailableprofiles to recall from your display are:
•Factory
•XRay
•User1
•User2
•User3
To recall a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Recall Profile submenu.
4. Select one of the available profiles to recall and confirm.
5.4.5 Save Profile
About saving profiles
The user can modify the default video parameters associated to each profile and save the new parameter
settings under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be modified, but
the factory default can’t be overwritten and can always be recalled through the recall profile menu item.
Theavailableprofiles to save in your display are:
•User1
•User2
•User3
To save a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Save Profile submenu.
4. Select one of the available profilestosaveandconfirm.
K5902113 (451920611383) E192HSA 27/11/2017
31
To Next Page
Loading...
