5. Advanced operation
Accessing the OSD menu is only possible after pressing a sequence of keys. Please refer to the dedicated
section for more details (Keyboard locking/unlocking).
To enable/disable keyboard locking
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Keyboard Lock submenu.
4. Enable/Disable keyboard locking as desired and confirm.
5.5.4 Power Saving
About power saving
When the active input(s) is (are) missing, this setting allows the display to switch off the backlight and
enter a low power mode. In this status the availability of the selected input is checked periodically.
When the unit is in power save mode, the unit can exit this power save mode in two
cases:
1. When a signal is applied on the selected input (or any input in case of auto).
2. By activating the OSD menu, see "OSD menu activation", page 16.
To enable/disable power saving
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Power Saving submenu.
4. Enable/Disable power saving as desired and confirm.
K5902113 (451920611383) E192HSA 27/11/2017
33
To Next Page
Loading...
