R5906852-01 F80 series102
A.1 Specifications of the F80-Q7
Overview
Projector type Single-chip DLP laser phosphor projector
Resolution 2,560 x 1,600 (WQXGA) native
Brightness 7,000 center lumen
Contrast ratio 1,200:1 sequential, 10,000:1 dynamic *
Brightness uniformity 95%
Aspect ratio 16:10
Lens type GLD / FLD+ (lens adapter needed)
Optical lens shift Up to 140% shift, depending on lens. Motorized zoom, focus, vertical and
horizontal shift
Color correction P7 RealColor™
CLO (constant light output) Yes*
Light source Laser phosphor
Light source lifetime Up to 40,000 hours, depending on mode of operation
Sealed DLP™ core Yes
Orientation 360° rotation, no restrictions
3D Active stereoscopic 3D * / Passive stereo compatible
Image processing Embedded warp & blend engine
Keystone correction Yes
Inputs HDSDI, 2x DP 1.2, 2x dual link DVI-D, HDBaseT, HDMI 2.0*, RJ 45
Ethernet, DMX in/out*, RS232 in, 2x USB, 12V out
Input resolutions Up to 4K UHD @ 60Hz / Up to 2,560 x 1,600 @ 120Hz
Software tools Projector Toolset
Control IR, RS232, RJ45, XLR wired
Network connection 10/100 Ethernet, RJ45
Power requirements 100-240V / 50-60Hz
Power consumption 700 W nominal, 850 W maximum
BTU per hour 2,400 BTU/h nominal, 2,900 BTU/h maximum
Standby power <0.5W
Noise level (typical at 25°C/
77°F)
35 dB(A)
Operating temperature 10°C (50°F)- 40°C (104°F) (up to 1500m altitude) / 10° (50°F) - 35°C (95°
F) (up to 3000m altitude)
Storage temperature -20 to 60 °C
Specifications
To Next Page
Loading...
Need help?
General
