R5906852-01 F80 series92
Image 9-23
The Pixel Shift menu will be displayed.
Image 9-24
4. Change the values to the desired position.
• Gain: is the amplitude of the waveform which is sent into the Wobulator. Default value: 0.65
• Resonance (frequency) : if frequency is 0Hz the wobulator is of. High frequency means high noise. Default
value: 227Hz
9.5 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
Setting Default value
UserInterface Theme Light
Network Communication LAN, Automatic settings
System Eco Mode (if applicable) Available
Ready Timeout auto
Screen Screen luminance - Unit nits
Optics High Contrast Off
Illumination Power 100%
ImageConnector Color Space auto
Signal Range auto
ImageResolution Output Resolution (if applicable) 4K UHD
ImageWarp Screen size 5120x3200 / 2560x1600
4 corner
Bow
Warp off, no warp
Warp files Disabled, no files selected
GUI – System Settings
To Next Page
Loading...
Need help?
General
