R5906852-01 F80 series104
Control IR, RS232, RJ45, XLR wired
Network connection 10/100 Ethernet, RJ45
Power requirements 100-240V / 50-60Hz
Power consumption 950 W nominal, 1,100 W maximum
BTU per hour 3,250 BTU/h nominal, 3,800 BTU/h maximum
Standby power <0.5w
Throw Ratio 0.85 - 1.06 ; 1.06 - 1.43 ; 1.43 - 2.12 ; 2.12 - 3.18
and compatible with FLD/FLD+ series (with adapter)
Noise level (typical at 25°C/
77°F)
35 dB(A)
Operating temperature 10°C (50°F)- 40°C (104°F) (up to 1500m altitude) / 10° (50°F) - 35°C (95°
F) (up to 3000m altitude)
Storage temperature -20 to 60 °C
Operating humidity 20 - 80% RH (non-condensed)
Storage - transport humidity 20 - 90% RH (non-condensed)
Dimensions (WxLxH) 480 x 680 x 227 mm / 18.9 x 26.7 x 8.9 in
Weight 25.5 kg / 56.2 lbs
Standard accessories Power cord, wireless remote control
Certifications CE, FCC Class A, cNemkoUS, CCC, EAC, KSA, RCM, UkrSEPRO
Warranty Limited 3 years parts and labor. Extendable up to 5 years
* * SW upgradable. Please contact an authorized Barco representative for
details.<BR\> ** When used in long-life mode, available SW upgrade.
A.3 Specifications of the F80-4K7
Overview
Projector type 4K single-chip DLP laser phosphor projector
Resolution 3,840 x 2,400 (4K UHD) / 2,560 x 1,600 (WQXGA native)
Brightness 7,000 center lumen
Contrast ratio 1,200:1 sequential, 10,000:1 dynamic *
Brightness uniformity 95%
Aspect ratio 16:10
Lens type GLD / FLD+ (lens adapter needed)
Optical lens shift Up to 140% shift, depending on lens. Motorized zoom, focus, vertical and
horizontal shift
Color correction P7 RealColor™
Specifications
To Next Page
Loading...
Need help?
General
