12. Alignment menu
How to set for the fi rst projector
1. Go to Layout → Main window → Size
2. Enter the value for the Height as follow: Total Vertical screen resolution / 2 - 0.5 x overlap zone.
3. Position remains the same.
Image 12-89
Image 12-90
Image 12-91
Image 12-92
How to set for the second projector
1. Go to Layout → Main window → Size
2. Enter the value for the Width as follow: Total Vertical screen resolution / 2 - 0.5 x overlap zone.
3. Position = original start + Vertical height projector 1 - overlap zone
Image 12-93
Image 12-94
Image 12-95
138 R59770179 FLM R22+ 15/03/2010
To Next Page
Loading...
