R5911692 /01 MDSC-8231 19
Image 3-2
DisplayPort VESA DP 1.2 certified cables for 5.4 Gbps HBR2 with a length of up to 2 m are
recommended.
Premium certified HDMI 2.0 cables with a length of up to 3 m are recommended.
3G-SDI Belden 1694A cables with a length of up to 50 m and 12G-SDI Belden 4855R cables with a
length of up to 30 m are recommended.
The DVI output must be enabled in the OSD menu (please refer to “DVI output”, page 42).
A subset of the commands of the remote control protocol is also available on a new DDC protocol
on DVI and DisplayPort1 auxiliary channel.
3.3 Power supply connection
To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper
power cord delivered in the packaging.
Image 3-3
CAUTION: To avoid risk of electric shock, the external DC power supply must be connected to a
mains with protective earth. The ground connection on the display’s DC power input connector has
no protective earth function. The MDSC-8231 display protective earth connection is provided via a
dedicate pin (see next steps).
Installation
To Next Page
Loading...
