R5911692 /01 MDSC-823142
5.5.5 DVI output
About DVI output
This setting allows to enable or disable the DVI output function of your display. Enabling DVI output will
duplicate the entire image on the screen (including OSD) to a FHD (1080p/1080i) signal on the DVI output
connector. For 4K images, the center part of the image will be down-scaled to FHD resolution.
To enable/disable DVI output
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the DVI output submenu.
4. Enable/Disable DVI output as desired and confirm.
5.5.6 Operating hours
About operating hours
This information shows the operation hours of your display.
To consult operating hours
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. The operation hours of your display are shown at the bottom of the menu.
Advanced operation