7. Image Settings
7.6 Tint (hue)
About Tint (hue)
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when the
NTSC color system is used. For PAL and SECAM sources, tint is not accessible.
How to change the Tint ?
1. Select Image Settings.
2. Press ENTER to select.
Image settings menu will be displayed (menu 7-6)
3. Select Tint.
4. Press ENTER to activate.
A slider box appears.
5. Use the ↑ or ↓ to change the Tint.
The higher the value, the higher the tint.
Image Settings
Aspect ratio
Brightness
Contrast
(Color) Saturation
Tint
Sharpness
Viewport
Phase
Back
Menu 7-6
7.7 Sharpness
About Sharpness
The Sharpness function is used to adjust the image sharpness of video signals.
How to change the Sharpness ?
1. Select Image Settings.
2. Press ENTER to select.
Image settings menu will be displayed (menu 7-7)
3. Select Sharpne ss.
4. Press ENTER to activate.
A slider box appears.
5. Use the ↑ or ↓ to change the Sharpness.
The higher the value, the higher the sharpness.
Image Settings
Aspect ratio
Brightness
Contrast
(Color) Saturation
Tint
Sharpness
Viewport
Phase
Back
Menu 7-7
38 R5976672 SOLARIS LC40 01122003
To Next Page
Loading...
