10. Advanced Settings
5. Select File services.
6. Press ENTER to activate.
The File services menu will be displayed. (menu 10-22)
7. Select Load [Autom atic] or Load [Manually].
8. Press ENTER to toggle between Automatic and Manually.
Automatic
The most corresponding file will be loaded automatically.
Manually
The operator has the possibility to load a specific file.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Display Settings
Installation
Service
Back
Menu 10-20
Installation
File Service
When no signal
OSD configuration
Back
Menu 10-21
File Service
Load file
Load [automatic]
Back
Menu 10-22
10.7.1.3 Loading a specific file
How to load a specific file
1. Select Advanced Settings.
2. Press ENTER to activate.
The Ad vanced Settings menu will be displayed. (menu 10-23)
3. Select Installation.
4. Press ENTER to activate.
The Installation menu will be displayed. (menu 10-24)
5. Select File services.
6. Press ENTER to activate.
The File services menu will be displayed. (menu 10-25)
7. Select Load file.
The load file menu will be displayed. (menu 10-26)
8. If you want to load from a list of matching file, select List matching files.
If you want to load from the all available files, select List all f iles.
9. Select the desired file and press ENTER.
While scrolling through the files, the image will be online adapted.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Display Settings
Installation
Service
Back
Menu 10-23
Installation
File Service
When no signal
OSD configuration
Back
Menu 10-24
File Service
Load file
Load [automatic]
Back
Menu 10-25
Load File
List matching files
List all files
Back
Menu 10-26
10.7.2 When no Signal
About When no signal
The Solaris LC40 can switch automatically to standby after a certain time when no signal is available on the inputs.
62
R5976672 SOLARIS LC40 01122003
To Next Page
Loading...
