Barco Solaris LC40 R9004120 - Service; 1 Identification Screen; 2 IR Address

10. Advanced Settings
10.8 Service
Overview
• Identification screen
• IR address
• Serial communication
• IR locking
• Restore Factory Defaults
10.8.1 Identification screen
The display’s identification screen
The identification screen displays the display’s main characteristics.
These are :
• Display type
• IR address
• RS232 address
• Serial number of the display
• Run time since first start up
• Software version
How to display the identification screen ?
1. Press ENTER to activate the menu structure.
2. Select Advanced Settings and press ENTER to activate.
The advanced settings menu will be displayed. (menu 10-32)
3. Select Service.
4. Press ENTER to select.
The service menu will be displayed. (menu 10-33)
5. Select Identification.
6. Press ENTER to display the identification screen. (menu 10-34)
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Display Settings
Installation
Service
Back
Menu 10-32
Service
Identification
IR address : 004
Serial communication
IR locking
Restore factory defaults
Back
Menu 10-33
Identification
Solaris LC40
IR address : 4
RS232 address : 1
Serial number : 00000000
Runtime (h:mm) : 1:03
Soft version : 1.0
link : oct 10 2003
Back
Menu 10-34
10.8.2 IR address
How to change the IR address ?
1. Press ENTER to activate the menu structure.
2. Select Advanced Settings and press ENTER to activate.
The advanced settings menu will be displayed. (menu 10-35)
3. Select Service.
4. Press ENTER to select.
The service menu will be displayed. (menu 10-36)
5. Select IR address.
64
R5976672 SOLARIS LC40 01122003