R5911443 /02 UDM110
Image 9-2
Image 9-3: Press OK
3. Enter a suitable name for this profile via the pop up keyboard (arrow keys and OK (✓) to select). End the name
entry by selecting the “return” key on the pop up keyboard.
Image 9-4: Enter a name for the profile
4. Select the “Assign to preset slot”. A drop down menu will show up, select the preferred value.
Note: The function “Assign to preset slot” enables a shortcut to the actual profile from the remote
control. If assigned preset slot are set to 1, this profile can be recalled by pressing the key MACRO
and then 01 on the remote control. It is not a requirement to use this function, just an option.
Note: The maximum number of profile presets is 30.
5. Select the domains in the menu that shall be stored in the profile.
Image 9-5: Select domains
6. Select “create”and confirm by the OK button.
The profile “video” are now created and saved.
7. Repeat step 1 to 6 for creating of more profiles.
GUI – Profiles
To Next Page
Loading...
