R5911443 /02 UDM 111
Recall a profile.
1. Enter the menu Home / Profile
The stored profiles will be visible in the menu. Select the actual profile.
Image 9-6
or
Select the numeric shortcut from the remote control.
Edit a profile
1. Enter the menu Home/Profiles/Edit
Select the profile to be edited.
2. Set, or change the “Assign to preset slot” number, or delete the actual profile. It is not possible to add or
remove selected features in an stored profile. Must then be deleted, and a new profile must be created.
Image 9-7 Image 9-8
GUI – Profiles
To Next Page
Loading...
