AW00061111000 Installing a GigE Camera
Installation and Setup Guide for ace CL, aviator, beat, pilot, racer, runner, and scout Cameras (Windows) 39
4. Click the OK button.
The tool will save your changes which takes a few seconds. When the tool has finished saving,
the information in the top pane and the lower central area will have been updated automatically
with the new IP address.
Assigning a Temporary IP Address to Older or Newer Cameras (Optional
Assignment)
Another situation where you might want to assign a temporary IP address to a camera would be if
you temporarily moved the camera from the computer where it is normally connected to another
computer that is in a different subnet. This can be necessary from time to time regardless of whether
you have a newer or an older camera model.
ā
Assigning a Temporary IP Address to Older Or Newer Cameras:
1. Right-click on the camera whose IP configuration you want to change.
2. Choose Assign Temporary IP Address from the context menu.
3. Follow the steps described under "Assigning a Temporary IP Address to Older Cameras" on
page 38.
To assign a temporary IP address to older or newer cameras:.
To Next Page
Loading...
