AW00061111000 Revision History
Installation and Setup Guide for ace CL, aviator, beat, pilot, racer, runner, and scout Cameras (Windows) 63
Revision History
Document
Number
Date Changes
AW00061101000 14 Feb 2008 Initial version:
Transferred the following sections from the User’s Manuals of the
scout-g (AW00011907000), scout-f (pylon) (AW00012505000), and
pilot (AW00015109000) cameras: "Software and Hardware
Installation", "Network Recommendations", and "Camera and
Network Adapter IP Configuration".
Restated precautions for the scout, pilot, and runner cameras.
The instructions for SP2 partial rollback were not included from the
Scout-f (pylon) User’s Manual (they are now in the "Windows XP
SP2 Partial Rollback" Application Notes, AW000615xx000).
Made adjustments for Basler pilot 2.0 software.
Added instructions for setting and adjusting packet size and frame
rate.
AW00061102000 20 Mar 2009 General
Made adjustments for Basler pilot 2.1 software.
Updated Basler web address.
Deleted sections concerning Basler pylon Driver Runtime
Package.
Chapter 2
Added a note on page 8 indicating that an application note
regarding EMI/ESD control is available.
Chapter 3
Adapted system requirements and installation packages.
Updated pylon software components section.
Chapter 5
Adapted "Software Installation" on page 16.
Adapted "Adjusting the Installation" on page 19.
Adapted "Configuring a Network Adapter Used with the Filter
Driver" on page 19.
Integrated "Disabling the Windows Firewall" on page 21.
Moved "limitation" note box to the beginning of section "Setting
an Adapter to Use DHCP / Auto IP (LLA)" on page 42.
Removed sections "Changing the Driver Association for a
Compatible GigE Network Adapter" and "Unbinding the Basler
Filter Driver from a Network Adapter" to newly created section
"Modifying the Driver Installation" on page 54.
Chapter 6
Adapted "Installing the Basler pylon Camera Software Suite" on
page 71.
Adapted "Modifying Your Software Installation" on page 93.
To Next Page
Loading...
