Basler ace CL - Modifying the Driver Installation; Changing the Driver Association for a Compatible Gige Network Adapter

Installing a GigE Camera AW00061111000
40 Installation and Setup Guide for ace CL, aviator, beat, pilot, racer, runner, and scout Cameras (Windows)
4.7 Modifying the Driver Installation
4.7.1 Changing the Driver Association for a
Compatible GigE Network Adapter
During installation of the Basler pylon Camera Software Suite, the current network adapter-driver
associations are changed for all compatible network drivers installed in your computer. The Basler
performance driver will replace the current drivers.
If you want to reestablish a network adapter-driver association with the original driver, follow the
procedures below. The procedures describe how to change the driver on a GigE network adapter
from the performance driver back to the original driver.
1. Open the Network Connections window in the Windows Control Panel. For quick access,
press the Windows + R keys, enter ncpa.cpl and press the Enter key.
2. Find the entry for the network adapter whose association you want to change. Make sure that
the window is set to display details (right click within the window, select View, and select
Details). When moving the pointer over the name of the network adapter, notice that the tooltip
indicates Basler GigE Vision Adapter.
3. Right click on the name of the network adapter.
4. Select Properties from the context menu. A LAN Connection Properties window for the
adapter will open.
5. Click the Configure button.
6. Select the Driver tab.
7. Click the Update Driver button.
8. When the hardware wizard opens, click Browse my computer for driver software.
9. Click Let me pick from a list of device drivers on my computer.
10. From the list that appears, select the original driver for the adapter (e.g., in a case where the
Intel Pro 1000 GT Desktop Adapter is installed in the computer, select Intel Pro 1000 Desktop
Adapter from the list) and click the Next button.
11. The system will update the driver. Click the Close button.
12. Close the Properties window.
In the Network Connections window, notice that the Device Name for the adapter has
changed (in the case of the Intel Pro 1000 GT, it will now be Intel Pro/ 1000 GT Desktop
Adapter).
The network adapter-driver association is changed.
To change the driver association:.