EasyManuals Logo

Basler GigE VISION CAMERAS User Manual

Basler GigE VISION CAMERAS
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Physical Interface AW00118303000
62 Basler racer GigE
7.6.1.3 Input Line Inverters
You can set each individual input line to invert or not to invert the incoming electrical signal. To set
the invert function on an input line:
Use the Line Selector to select an input line.
Set the value of the Line Inverter parameter to true to enable inversion on the selected line and
to false to disable inversion.
You can set the Line Selector and the Line Inverter parameter value from within your application
software by using the pylon API. The following code snippet illustrates using the API to set the
selector and the parameter value:
// Enable the inverter on line 1
Camera.LineSelector.SetValue( LineSelector_Line1 );
Camera.LineInverter.SetValue( true );
For detailed information about using the pylon API, refer to the Basler pylon Programmer’s Guide
and API Reference.
You can also use the Basler pylon Viewer application to easily set the parameters.
For more information about the pylon Viewer, see Section 3.1 on page 23.
7.6.1.4 Selecting an Input Line as a Source Signal for a Camera
Function
You can select an input line as the source signal for the following camera functions:
the Acquisition Start Trigger
the Frame Start Trigger
the Line Start Trigger
the Phase A input for the shaft encoder module
the Phase B input for the shaft encoder module
Note that to use an input line as the source signal for a camera function, you must apply an electrical
signal to the input line that is appropriately timed for the function.
For detailed information about selecting an input line as the source signal for the camera’s
Acquisition Start Trigger function, see Section 8.2.2.2 on page 80.
For detailed information about selecting an input line as the source signal for the camera’s Frame
Start Trigger function, see Section 8.2.3.3 on page 85.
For detailed information about selecting an input line as the source signal for the cameras Line Start
Trigger function, see Section 8.2.4.2 on page 88 and Section 8.2.4.3 on page 91.
For detailed information about selecting an input line as the source signal for the shaft encoder
model Phase A or Phase B input, see Section 8.6 on page 139.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Basler GigE VISION CAMERAS and is the answer not in the manual?

Basler GigE VISION CAMERAS Specifications

General IconGeneral
BrandBasler
ModelGigE VISION CAMERAS
CategoryDigital Camera
LanguageEnglish

Related product manuals