AW00118303000 Tools for Changing Camera Parameters
Basler racer GigE 23
3 Tools for Changing Camera
Parameters
This chapter explains the options available for changing the camera’s parameters. The available
options let you change parameters either by using stand-alone tools that access the camera via a
GUI or by accessing the camera from within your software application.
3.1 The pylon Viewer
The Basler pylon Viewer is a standalone application that lets you view and change most of the
camera’s parameter settings via a GUI based interface. The pylon Viewer also lets you acquire
images, display them, and save them. Using the pylon Viewer software is a very convenient way to
get your camera up and running quickly when you are doing your initial camera evaluation or doing
a camera design-in for a new project.
The pylon Viewer is included in the Basler pylon Camera Software Suite. You can obtain the pylon
Camera Software Suite from the Basler website: www.baslerweb.com
For more information about using the pylon Viewer, see the Installation and Setup Guide for
Cameras Used With the Basler pylon Camera Software Suite (AW000611xx000). You can
download the guide from the Basler website: www.baslerweb.com.
3.2 The pylon IP Configurator
The Basler pylon IP Configurator is a standalone application that lets you change the IP
configuration of the camera via a GUI. The tool will detect all Basler GigE cameras attached to your
network and let you make changes to a selected camera.
The pylon IP Configurator is included in the Basler pylon Camera Software Suite. You can obtain
the pylon Camera Software Suite from the Basler website: www.baslerweb.com
For more information about using IP Configurator, see the Installation and Setup Guide for Cameras
Used With the Basler pylon Camera Software Suite (AW000611xx000). You can download the
guide from the Basler website: www.baslerweb.com.
To Next Page
Loading...
Need help?
General
