Baumuller b maXX 1000 - Page 58

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
58
of 208
4.3
P0860
If the b maXX
®
1000 is controlled by RS-485 serial communication, the communication
address for this drive must be set via this parameter. The communication address for
each b maXX
®
1000 must be different and unique.
P0861
This parameter is used to set the transmission speed between the RS485 master (PLC,
PC, etc.) and b maXX
®
1000.
bps = bits per second
P0862
This parameter is set to how to react if transmission errors occur.
P0860
Kommunikationsadresse RS485 1 to 254
EE Communication address RS485 1
STOP BM_u_CommRS485Address 1:1 -
P0861
Übertragungsgeschwindigkeit RS485 0 to 3
EE Transmission speed RS485 3
STOP BM_u_TransmissionRS485Speed 1:1 -
Value Meaning
0 Baud rate 4800 bps
1 Baud rate 9600 bps
2 Baud rate 19200 bps
3 Baud rate 38400 bps
P0862
RS485 Übertragungsfehler 0 to 3
EE RS485 Transmission fault treatment 3
ON BM_u_RS485TransFaultTreat 1:1 -
Value Meaning
0 Warn and keep operating
1 Warn and RAMP to stop
2 Warn and COAST to stop
3 No warning and keep operating