Baumuller b maXX 1000 - Page 74

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
74
of 208
4.3
P1079
This parameter displays the warning code.
P1079
Warnung Code 0 to 65535
- Warning code 0
A BM_u_WarningCode 1:1
Value Meaning
7 Communication error Modbus (cE10)
8 Motor loading exceed (oL2)
9 Warning, wareform by H2100hi byte (AUE)
10 Under current (Uc)
11 Warning, PU Keypad Copy parameter operation error (SE1)
12 Warning, PU Keypad Copy parameter save error (SE2)
13 Warning, Motor PTC temperature warning (PtC2)
14 PG loss warn (PG_WARN)
15 Warning, IO PID feedback error (FbE)
16 Warning, IO PU keypad copying (SAvE)
23 IO COM1 comm time out (PE10)
24 ADDA card break off (AoFF)
25 Lower than standard voltage (Lv)
26 Control broad ACI (current) loss (Aerr)
27 Base-block (bb)
33 CANopen SDO Time out (CSdo)
34 CANopen SDO buffer overflow (CSbF)
36 Can Boot up fault (CbtU)
50 Error count for CAN detect (cc01)
51 SYNC fault(cc03)
52 Communication error USB card (UbCd)
53 Error protocol of CANOPEN (cPt2)