Baumuller b maXX 1000 - Page 94

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
94
of 208
4.3
P1124
If a multi-function output terminal is set to function as desired frequency attained
(ZP1110– to ZP1117– = 9), then the output will be activated when the programmed fre-
quency is attained.
Figure 43: Output timing chart of multi function terminals
Bit Meaning
0 RLY status
1 MO1 status
2 MO2/RA2 status
3 MO3/RA3 status
4 MO4/RA4 status
5 MO5/RA5 status
6 MO6/RA6 status
7 MO7/RA7 status
P1124
Sollgeschwindigkeit erreicht 0.00 to 600.00 Hz
EE Desired frequency attained 0.00 Hz
STOP BM_u_DesiredFrequencyAttained 100:1