BayTech RPC-2 - Enable;Disable Status Menu

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
26
From the configuration menu, select #3,
“Enable/Disable Confirmation.”
Depending on the current status of the
switch, the RPC responds with the option to
change the current status.
Default is
Enabled.
Disable Confirmation? (Y/N)
Enable/Disable
From the configuration menu, select #4,
Status Menu
“Enable/Disable Status Menu.” If the
Enable/Disable Status Menu feature is
enabled, the following status menu appears.
Default setting is Enabled.
Circuit Breaker: On
1) Outlet 1 : Off
2) Outlet 2 : Off
3) Outlet 3 : Off
4) Outlet 4 : Off
5) Outlet 5 : Off
6) Outlet 6 : Off
RPC-2A >
If the Enable/Disable Status Menu feature is
disabled, only the RPC-2A > prompt
appears.