RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
50
Login setup
Toggle option by entering number, CR to exit.
Network access:
1)...Prompt for user name: disabled
2)...Prompt for password : disabled
Serial Port Access:
3)...Prompt for user name: disabled
4)...Prompt for password : disabled
Enter the number that corresponds to the
prompt you want to toggle. The unit
responds by asking if you want to enable the
prompt, if it is currently disabled or disable
the prompt, if it is currently enabled. Type
“Y” for “Yes,” or “N” for “No,”
accordingly.
IMPORTANT:
If user name and password are disabled (factory
default), outlet users will have access to all admin functions.
NOTE:
A null password (<cr>) for any particular user disables
the password login requirement for that user, even if prompt for
password is enabled.
Outlets
From the configuration menu, select #6,
“Outlets.” The following Outlet Operation
Configuration Menu appears:
Outlet Operation Configuration Menu
Enter Request, CR to exit
1) . . . Outlet Status Display: enabled
2) . . . Command Confirmation: enabled
3) . . . Outlet Power-up Delay
4) . . . Name Outlets
5) . . . Display Outlet Users
Enter Request >
To Next Page
Loading...
Need help?
General