RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
36
RPC-3 AND RPC-3A and RPC-5
NOTE
:
The RPC-3, RPC-3A and RPC-5 are configured in a
similar manner. The RPC-5 has 4 outlets and supports 4 users. The
RPC-3/3A has 8 outlets and supports 8 users. These differences are
minor and not specifically addressed unless significant to the topic
of discussion. The term “RPC Series”, as used in this section, will
include the RPC-3, RPC-3A, and the RPC-5.
IMPORTANT:
“IN” #1 supplies power to the logic of the RPC-5.
This inlet must have power for the unit to operate.
The RPC Series are multi-user units,
supporting one admin user and up to eight
outlet users. The admin user has access to
all outlets, user and system configuration
options, unit status, and unit reset
capabilities. The outlet user has access to
only those outlets in the user’s outlet list, as
set by the admin user. The outlet user’s
menu and status display shows only those
outlets available to the user.
NOTE:
The RPC Series supports one admin user. The admin
user may have four sessions running concurrently. Default user
name is admin. User names are case sensitive.
NOTE:
Each session has an inactivity timeout of ten minutes.
After ten minutes of no activity elapses, the session terminates.
To Next Page
Loading...
Need help?
General