RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
46
Change Outlet List
The outlet list determines which outlets a
particular user can access. From the User
Management Menu, enter the number of the
user to modify, followed by <cr>. Then
select #2, “Change Outlet List.” The RPC
Series responds:
To change outlet access, enter number(s) of outlets. If
more than one entry, separate numbers with commas.
CR to exit.
User Name: engineering
Outlet Access
1) . . . Outlet 1 yes
2) . . . Outlet 2 no
3) . . . Outlet 3 yes
4) . . . Outlet 4 yes
5) . . . Outlet 5 no
6) . . . Outlet 6 yes
7) . . . Outlet 7 yes
8) . . . Outlet 8 no
NOTE:
If an outlet user’s list is changed and they are logged in at
the time, their outlet list changes dynamically. If enabled, an
updated outlet status report will be issued.
To toggle outlet access, enter the number
that corresponds to the outlet you want to
change. For example, if you want
engineering to have access to Outlet 2, enter
the number 2, followed by <cr>. If you
want engineering to have access to Outlets
2, 5, and 8 enter the numbers 2, 5 and 8
separated by commas: 2,5,8, followed by
<cr>.
To Next Page
Loading...
Need help?
General