RPC-SERIES OWNER’S MANUAL
APPENDIX B
66
APPENDIX B
MODEM COMMAND SUMMARY
U.S. ROBOTIC MODEMS
COMMAND INTERPRETATION
AT&B1
Fixed Serial Port Rate (default)
AT&C1
Normal CD Operations (default)
AT&D2
Normal DTR Operations (default)
ATS0=1
Auto answer telephone line in 4 or fewer rings
ATE0
Modem does not display keyboard commands.
ATQ1
Place modem into quiet mode
AT&W0
Save the modem’s configuration in non-volatile
memory
NOTE:
To send all of the above at the same time, type the following
command: AT&B1&C1&D2S0=1E0Q1&W0
To Next Page
Loading...
Need help?
General