RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
55
RPC Unit Status Menu
1) . . . System
2) . . . Network Interface
3) . . . Logged Users
4) . . . Outlet Status
Enter selection>
System Status
System Status provides information about
the local memory (available buffers), how
many TCP sockets are in use, and the time
the unit has been operating since the last unit
reset or power up.
From the Unit Status Menu, select #1
“System.” The following system
information is provided:
System Status:
Available local memory (256 byte buffers: 30)
TCP sockets in use: 1
System up time (days: hh:mm:ss): xx:xx:xx:xx
<Strike any key to continue.>
Network Interface
Network Interface gives information on the
medium or connection status between the
RPC unit and the equipment it is attached to,
the number of faults, if any, the number of
transmitting errors, the number of buffers
left (30 or less) available to send data, and
whether the receive queue status is available
to receive data. From the Unit Status Menu,
select #2, “Network Interface.” The
following network information is provided:
To Next Page
Loading...
Need help?
General