BayTech RPC-2 - Outlet Naming and Password Disablement for MD01;RDR

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
34
typing CONFIG” from the RPC > prompt to
access the configuration menu. If you re-
enter the new password correctly, the RPC
returns to the main menu again, but you will
not get an “Error” message.
Circuit Breaker : On
1) . . . OUTLET 1 : Off
2) . . . OUTLET 2 : Off
3) . . . OUTLET 3 : On
4) . . . OUTLET 4 : Off
5) . . . OUTLET 5 : Off
6) . . . OUTLET 6 : Off
RPC >
Disabling a Password
To disable a password, enter a carriage
return at the
“Enter New Password”
prompt. Enter another carriage return at the
“Re-enter New Password”
prompt.
Changing the new password to a carriage
return disables password protection
Change Outlet Name
From the status menu’s RPC > prompt, type
CONFIG
. The following menu appears:
RPC > CONFIG
1) . . . Change Password
2) . . . Change Outlet Name
Enter Request: