BayTech RPC-2 - Procedure for Renaming RPC Outlets

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
53
Enter number of outlet to name, CR to exit.
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . OUTLET 4
5) . . . OUTLET 5
6) . . . OUTLET 6
7) . . . OUTLET 7
8) . . . OUTLET 8
Enter Request:
Enter the number of the outlet you want to
change. If you want to change the name of
Outlet 4, type the number 4 at the “Enter
Request” prompt, followed by <cr>. The
RPC responds:
Enter:
Enter a new receptacle name (maximum
field length, 10 characters), followed by
<cr>. If you want to change the name of
Receptacle 4 from Outlet 4 to Router 1, type
Router 1 from the “Enter” prompt, followed
by <cr>. The RPC responds with the outlet
name menu displaying the name change to
Outlet 4:
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . Router 1
5) . . . OUTLET 5
6) . . . OUTLET 6
Enter Request:
To return to the configuration menu, press
any key.