RPC SERIES OWNER’S MANUAL
REPACKAGING, SHIPPING, AND RETURNING TO THE FACTORY
________________________________________________________________________________
61
REPACKAGING, SHIPPING AND
RETURNING TO THE FACTORY
If your Bay Tech unit needs service, upgrade, or repair, return it to
BayTech. Before dismantling your equipment or before returning the unit
for any reason, always call BayTech. The user should never attempt
repairs on this unit. If you need to return the RPC Series to the factory for
repair, warranty work, or upgrade, follow the instructions below for
repackaging and shipping.
INSTRUCTIONS FOR REPACKAGING AND
SHIPPING:
a. Call BayTech to get a
Return Authorization Number
.
IMPORTANT:
Without this number, BayTech will not accept
returns.
b. Use the original packaging if available or choose a heavy
cardboard box.
c. Surround your unit with a minimum of two inches of insulation.
d. Be sure to seal the box securely with strapping or packing tape.
We do not recommend masking tape or cellophane tape.
e. On the outside of the box, please write the Return Authorization
Number.
f. Ship the unit to the following address:
Bay Technical Associates, Inc.
200 N. Second Street
Bay St. Louis, MS 39520-1000, USA
To Next Page
Loading...
Need help?
General